banner



How To Add Cheat Codes To Project 64

Project64 Cheats FAQ.
Written By The Gentleman

This should aid yous with any questions that you might take most
adding & editing Codes in the Cheat Database.
Maximize this window if y'all are having trouble viewing it.

The Exercise'southward & Don'ts' Of Adding & Editing Cheat Codes.


Q: Why dont the cheats work in PJ64 ?
I ticked what i wanted to utilize merely it does nothing on all games i have tried.
What can i do to make them work ?
A: Brand certain yous have enabled your Memery Pak otherwise cheats will not piece of work !

     To brand certain it is go to options/Configure Controller Plugin (see picture show beneath)

              :: click to enlarge ::

    Now the input dialogue will open up

    & make sure the Retention Pak is plugged in is ticked.

                :: click to enlarge ::

Now click ok & Mem Pak is ready for use with cheats.

Q: Why can't i encounter whatever cheats in the Menu, it is Bare ?
A: Well this could be several reasons.
01: The game you lot are playing has no cheat support at the moment, so either follow the links

      to a site  to add yourself some cheats, or wait until they are supported for that game.
02: Make sure that the Project64.cht file is in the root folder (with the Project64 Exe)

03: At that place May be a retentiveness hang caused past opening too many Roms afterwards the other

      this can cause the Crook Menu, Rom Properties to display empty.

      But shut Project64 so reopen it.

      Load your game and check if the Cheats are there.

04: Check your Rom with Goodn64 it might exist because of the following reasons:
You take a Rom that is a Bad or Alternative Rom..

      The Rom may take a different CRC  and isn't recognised.

      You can do ii things hither: to fix this problem:

04a: Cheque Paulob'due south "GoodN64 Bad2Good Patches"

    and yous will also need IPSWin 2.0 to Patch the Rom.

These are bachelor from the superb Emutalk.internet Downloads > Misc > Tools

and see if it has your Roms name in there, if it does then patch it to be recognised equally the Adept Rom version leaving you to play on with no problem at all.

04b: You would need to add together a cheat into the blank menu for the game.

And so just enter this example below:

Test Cheat

80123456 0001

Once you accept added the cheat  close PJ64.

Now become into the root folder of Project64 & open up the Project64.cht file in a text editor.

In other words Double Click the Project64.cht File and it will open in Note Pad.

Search for your Games proper noun:
In this case nosotros will try Super Mario 64  = //Super Mario 64
so search for //Super Mario 64 if that shows cypher try without gaps etc

making sure you are the right Region Cheats you lot demand in one case it finds it.

(JU) = :41 (1080) these are for NTSC
(J)    = :4A (JAPAN) these are for NTSC
(U)   = :45 (USA) these are for NTSC
(Eastward)    = :fifty (Europe) these are for PAL
(A)   = :55 (Commonwealth of australia) these are for PAL
(Thou)    = :44 (Germany) these are for PAL
(F)    = :46 (France) these are for PAL

So if its the USA Region you want information technology volition be shown like this in the search

//Super Mario 64
[635A2BFF-8B022326-C:45] <<<< Arrow points to the CRC
Proper name=SUPER MARIO 64


Once you have found it re-create the entire Cheat entry for the //Super Mario 64 to the terminate //----
and by it to the Bottom of the file under the 1 test y'all added.


//Super Mario 64
[New-CRC-C:45]
Name=SUPER MARIO 64

Cheat0="Test Cheat",80123456 0001

Now Copy the Exam Cheat CRC over the original One below information technology.
Now delete the one above leaving this i the only new one added.

Save As and and so say ok/Yes to overwriting the file and and so shut.

  Happy Adulterous! :w00t:

Q: Is at that place a style to brand Project64 Call back Cheats i take left on in a game

     even after closing and reopening ? and if and then how ?

A: Yes at that place is, On the Project64 Gui: Options\Settings\Options\Retrieve Select Cheats.

                :: click to enlarge ::

     Now Cheats on all Games  that accept been left on when yous closed Project64 last

     will be remembered and automatically enabled on the side by side load of a game .

     So make certain y'all turn off any that you exercise not desire back on earlier closing.

Q: Where do i find cheat codes  to add together myself into the Crook file ?
A: You tin can find a list of links by clicking
Emu64cheats  link  & then Cheat Sites.

Q: How do i add cheat codes  in PJ64 ?
A: Click on the

Adding Cheats   link for a full caption.
But please remember that you lot do non need to add together Enable or Keycodes codes.

     These are only to be used on the real Console Cheat devices,  PJ64 does not demand them.

Q: Can i add together, edit & delete cheat codes in PJ64

     without having to open the crook file in a text editor ?.
A: Yes Project64 1.5 will allow y'all to add, edit & delete through the GUI.
Click the following for more than information on
Adding , Editing, Deleting & Using Cheats

Q: Can i add or edit codes in the Project64.cht file in a text editor ?
A: yeah, but 1st:
i'd have to say you dont need to, as you can do all this through the GUI
merely if you experience you want to and so...
Open the Cheat File In Word pad, & search the Name of the Game & Region.

example: Super Mario 64
One time you have, Make certain that you look at how the Cheats are written in the file.
example: Cheat0="Ostrich Mario",8033B3BC 0090
Cheat1="Mario Runs Backwards",8033B3BE 0070

Notice how the codes are written & how the code's are Separated past a Gap (Space)
like XXXXXXXX XXXX & not all in one lawmaking XXXXXXXXXXXX.

If information technology is a Modify Lawmaking that you would like to add Similar:
example: Cheat5="Open up Level Character Modifier",8125508A 00??
Cheat5_O=$01 Easy Level,$02 Easy & Normal Level,$03
Brand certain that the Necktie (Chain equally information technology were) (O) Pick:

Is listed somewhere below & shares the Same Cheat Number.
Too check to see if the ?? (Question Marks) are the same corporeality every bit the $00 (Values)

As well If you would like to right a note to the code like:
Cheat7="Play Equally Options",811653D2 00??
Cheat7_O=$07 The Large Green One,$08 Vikki,$09 Plastro
Cheat7_N=Here you tin choose who yous would similar to play as.

But Do non use this with whatsoever other play every bit option.
The annotation will now exist displayed in the cheats menu

when you click on the called cheat code option.

Now you lot may or may non of noticed the \ in the Active Modify Code Example.
This is what is used groupings (or in manifestly English)

Information technology is used to grouping sure cheats together in the cheat card.
You are most likely to find them in role player 1, player 2 or solo & multi player options.
The \ will group all the Cheats in ane option Box with a + sign to the left of the Box to open  In that location yous volition find every cheat that comes under that pick, already to be chosen.

Important find to remember:
Make sure that the ie (Concatenation as it were) _O= (Pick) & _N= (Notes): are listed somewhere below & shares the Same Cheat Number.
As well check to see if the ?? (Question Marks) are the aforementioned amount as the $00 (Values)

Q: How do i know what cheats are for what region ?
Too how would i know them from written in the cheat file ?

(JU) = :41 (1080) these are for NTSC
(J)    = :4A (JAPAN) these are for NTSC
(U)   = :45 (USA) these are for NTSC
(E)    = :50 (Europe) these are for PAL
(A)   = :55 (Commonwealth of australia) these are for PAL
(Thousand)    = :44 (Federal republic of germany) these are for PAL
(F)    = :46 (France) these are for PAL

Q: How many codes tin i put in a game, is there a limit

     & what would happen if i went over it ?
A: You can put 500 cheats in per game, IE: Cheat0 - 499.
Y'all tin put in 100 codes per crook.

IE: Cheat0="All Guns",xxxxxxxx xxxx,xxxxxxxx xxxx, (up to 100) Codes per line.


If you were to put the codes in PJ64 through the GUI (Cheats Menu) annihilation over 500 cheats per game would crash information technology.
If you were to put the codes in PJ64 through a text editor, only the 0-499 cheats would prove up in the cheat carte.

Q: Can i use Stacked Activators for hacked moves, in No Mercy ?
A: Aye yous can, Project64 1.5 now has the function.

     /Me hears all happy screaming No Mercy fans all over the world.

Q: I take seen this Cheat code on a site but it starts with a 50, 88, 89, D0,D1, D2 number.

     Tin can i use this In the PJ cheat File.
A: Yes yous tin can, infact in that location are already many many codes

      but like it in the cheat file already..

Previous Versions of Project64 never had these capabilities

& have just been introduced into V1.5.
How this works will be explained a little further downward.
The 88, & 89 Codes are GS/AR Button Codes, & they are available to use Via the F9

On your Keyboard to apply on PJ for a Quick injection code like Press F9 for 99 coins.
The D0,D1,D2 Codes are Activator Codes & are used to actuate the use of a Codes at a push of a button like Press L to Levitate, Printing R for Full Health Etc.

Q: Is there whatever codes that i can non use considering they are non supported ?
A: Yes, at that place are Codes that are not supported & all those codes are listed below.

Hither is a list of codes that are & not supported.

Supported Codes:   N vi 4 C O D E T Y P Due east S

Format Clarification

80-XXXXXX 00YY eight-Bit Constant Write

81-XXXXXX YYYY 16-Bit Constant Write

l-00AABB CCCC Serial Repeater

88-XXXXXX 00YY eight-Fleck GS Button Write

89-XXXXXX YYYY xvi-Chip GS Button Write

D0-XXXXXX YYYY viii-Bit If Equal To

D1-XXXXXX YYYY 16-Chip If Equal To

D2-XXXXXX YYYY viii-Bit If Not Equal To

D3-XXXXXX YYYY sixteen-Fleck If Not Equal To

A0-XXXXXX 00YY viii-Bit Abiding Write (Uncached)

A1-XXXXXX YYYY 16-Fleck Constant Write (Uncached)

Un supported Codes:  N vi iv C O D E T Y P E Due south

Format Description

CC-000000 0000 Disable Expansion Pak
DD-000000 0000 Disable Expansion Pak
EE-000000 0000 Disable Expansion Pak

DE-XXXXXX 0000 Download & Execute

F0-XXXXXX 00YY eight-Bit Bootup Write Once

F1-XXXXXX YYYY 16-Bit Bootup Write In one case

FF-XXXXXX 0000 Store Activated Cheat Codes

Q: I accept also seen this bulletin on the (Pal Code) Action Replay sites maxim

     "Cant not be used with Equalizer" what is a Equalizer ? & can i nonetheless utilize them in pj64 ?
A: The "Equalizer" is a lilliputian Sis of the Activity Replay crook device

      simply works in just the same fashion as its big brother does.
The just divergence now is, The "AR" is no longer in Product, & the "EQ" still is.
Yes yous can utilise them codes with pj64.

Q: where can i get a full update provided by Emu64 Cheats for PJ64 ?
A: y'all can check for updates by clicking  the

Downloads link & and so pj64 cht Files link

     If the file is updated that is where information technology volition exist forth with any previous versions.

Q: How practise i utilise cheat codes in PJ64 ?
A: For a full Visual Explanation click on the

Using Cheats link.

Q: You said something well-nigh Serial repeaters (patch Codes) how do they piece of work ?
A: The 50 numbers = Serial Repeaters (Patch Codes) What they do is patch (compress)

      100's of codes down to a minor Patched Version.

example: California Speed Cheat2="Accept All\Cars",50001504 0000,800AAE5B 0001
50001504 0000,800AAE5B 0001 = 21 Codes Changing by 4 Hex College in the last Digit

in the Memory Each time & the beginning off point is the second code after the 50 Patch.

Have a look & count up the iv Hex jump.
To aid you understand how the numbers in Hex go up

The Hex Count goes from 0-ix, A-F & then 10-19, 1A-1F & then on.
So where the Decimal count goes from 0-255 Its Hex Equivalent = 00-FF

so if y'all can imagine a decimal count of 0-31 the hex Count would be 0-1F

Dec: 1,2,3,4,5,half-dozen,7,8,9,x,11,12,13,14,15,xvi,17,18,19,xx,21,22,23,24,25,26,27,28,29,xxx,31
Hex: one,2,iii,four,5,6,7,8,9, A, B, C, D, Due east, F,10,xi,12,13,fourteen,xv,16,17,eighteen,19,1A,1B,1C,1D,1E,1F

& and then on & upwards, & that should give y'all the thought how the Hex Count works.

And then then how do we make this Patch 50001504 0000,800AAE5B 0001

Well the 50 patch codes works similar this.
You tell the patch how many codes there are & how much they alter from each other.
At present this is a Serial repeater, Meaning that the primary retentivity Address has the same Value.

The memory Address beingness the third to 5th number & the Value the final 4 9th to 12th.
The 1st to second code is a standard 8 Bit = fourscore this besides indicates that the value
will just exist the last 2 digits & will only go as loftier every bit FF the equivalent of a Dec 255.

Lets look at the lawmaking we are going to see change from 800AAE5B 0001 - 800AAEAB 0001

800AAE5B 0001
800AAE5F 0001
800AAE63 0001
800AAE67 0001
800AAE6B 0001
800AAE6F 0001
800AAE73 0001
800AAE77 0001
800AAE7B 0001
800AAE7F 0001
800AAE83 0001
800AAE87 0001
800AAE8B 0001
800AAE8F 0001
800AAE93 0001
800AAE97 0001
800AAE9B 0001
800AAE9F 0001
800AAEA3 0001
800AAEA7 0001
800AAEAB 0001

Run across by looking at the final Digit of the address that it is going up by 4 Hex on each Code.
Now all we accept to discover out is how many codes there are.

So lets start with a plain 50000000 0000 to begin with until we know how many codes & what the increase is.

Starting from the 1st code we can count information technology up to 21 codes at a iv Hex Jump each time.

Nosotros now know that in that location are 21 codes so we advert that in like this.
How many is 21 in Hex ?
The guide higher up tells united states it = xv so we volition add together that in 50001500 0000.
Good, now how many does it go up by 4, and so we add that in 50001504 0000.

So now we add together that serial Repeater to the 1st code 50001504 0000,800AAE5B 0001
& there yous get, 21 codes brought down to the number of 2.

You can also add A long line of Patches that could corporeality to a huge amount but would look like 10 Codes.
but you could also take as much as 500 codes in one patch.

A Question of regions.

As i always say, & really can non stress enough.
Practice not & i mean practise not try to add NTSC (U) (Gameshark) Cheat Codes to PAL (Due east) Games.
You will detect both PAL (E) & NTSC (U) Region Cheats on

Emu64cheats then Cheat Sites

If at that place is something you are still unsure of that isn't covered in the FAQ
Then give us a visit on irc #pj64cheats on EFnet
or post a question on the  Project64 Cheats Message Lath  On Emutalk.net

:: Cheats FAQ ::

How To Add Cheat Codes To Project 64,

Source: http://cheats.emulation64.com/pj64/cheatfaq.htm

Posted by: tremblaytagoink.blogspot.com

0 Response to "How To Add Cheat Codes To Project 64"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel